Braindump2go 100% Pass Promise: 350-080 Exam Dumps Questions New Updated By Cisco Official Exan Center (71-80)

CISCIO NEW UPDATED: New Updated 350-080 Exam Questions from Braindump2go 350-080 PDF Dumps and 350-080 VCE Dumps! Welcome to Download the Newest Braindump2go 350-080 VCE&PDF Dumps: http://www.braindump2go.com/350-080.html (394 Q&As)

2015 Latest released Cisco Official 350-080 Practice Exam Question Free Download From Braindump2go Now! All New Updated 394 Questions And Answers are Real Questions from Cisco Exam Center!

350-080 Dumps,350-080 Exam Dumps,350-080 Brainfump,350-080 Questions,350-080 VCE,350-080 PDF,350-080 Actual Test,350-080 Study Guide,350-080 Book,350-080 CCIE Data Center Written Exam,350-080 Test

QUESTION 71
A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below, what is the reason of this issue?
switch# show npv status
npiv is enabled
External Interfaces:
===============
InterfacE. fc1/1, VSAN: 1, FCID. 0x000000, StatE. Other Number of External Interfaces: 4

A.    NPV is not enabled on the core switch?
B.    The interface connected to the Core switch is in admin down state
C.    The local host interface belongs to the wrong VSAN?
D.    The local host interface is not able to login

Answer: B

QUESTION 72
Which three are valid methods to monitor and trend SAN port channels with DCNM? (Choose three.)

A.    use summary view in the device manager
B.    from the DCNM-SAN client, view ISLs in real time from the Performance drop-down list
C.    for each port channel, select Monitor Continually
D.    configure traps for each port channel to utilize RMON
E.    set up flows with the DCNM-SAN client and use the Performance Manager web client for performance
collections

Answer: ABE

QUESTION 73
When configuring vPC-HM CDP with multiple links to the same switch, are port-channels required?
A.    Each link between the upstream switch and the VEM is an individual subgroup.
B.    Connections that go to the same upstream switch must be configured with the command channel- group
<number> mode active.
C.    Connections that go to the same upstream switch must be configured with the command channel- group
<number> mode passive.
D.    With vPC-HM CDP, the user can pin traffic from a specific VM to a specific uplink.
E.    Connections that go to the same upstream switch must be configured with the command channel- group
<number> mode on.

Answer: E

QUESTION 74
A VSM is actually a virtual machine that requires how many vNICs for functioning?

A.    0
B.    1
C.    2
D.    3
E.    4

Answer: D

QUESTION 75
How many VSM modes are there in a Cisco Nexus 1000V environment?

A.    0
B.    1
C.    2
D.    3
E.    4
F.    5

Answer: D

QUESTION 76
Cisco IOS NetFlow gathers data that can be used in which three of these? (Choose three.)

A.    accounting
B.    authentication
C.    authorization
D.    network monitoring
E.    network planning

Answer: ADE

QUESTION 77
Which port channel command is recommended for N1KV on Cisco UCS?

A.    channel-group auto mode on
B.    channel-group auto mode active
C.    channel-group auto mode on sub-group cdp
D.    channel-group auto mode on sub-group manual
E.    channel-group auto mode on mac-pinning

Answer: E

QUESTION 78
vPath is a critical component in the VNS architecture. Which two are functions of vPath? (Choose two.)

A.    intelligent traffic steering to the VSG
B.    offloading the processing from the VSG to the VEM
C.    intelligent traffic steering to the VNMC
D.    offloading the processing from the VSG to the flow manager
E.    deep packet inspection

Answer: AB

QUESTION 79
What two facts does the output signify? (Choose two.)
n1kv-l3(config)# show lacp offload status
Current Status : Enabled
Running Config Status : Enabled
Saved Config Status : Disabled

A.    LACP is enabled on the Nexus 1000v.
B.    LACP will be offloaded to the upstream switch.
C.    LACP will be negotiated to the VM.
D.    LACP is negotiated by the VSM.
E.    LACP is negotiated by the VEM in all instances.

Answer: AE

QUESTION 80
The Cisco Nexus 1000V Series Switches are virtual machine access switches that are an intelligent software switch implementation for VMware vSphere environments running the Cisco NX-OS Software operating system. Together with the VMware ESX hypervisor, the Nexus 1000V supports Cisco VN-Link server virtualization technology, which provides mobile virtual machine security and network policy for VMware View components, including the DHCP snooping feature. DHCP snooping is disabled on the Nexus 1000V by default. When the DHCP snooping feature is enabled on the Nexus 1000V, what are the default trust settings for the vEthernet and uplink ports?

A.    All vEthernet ports are trusted, and all Ethernet ports such as uplinks and port channels are trusted.
B.    All vEthernet ports are not trusted, and all Ethernet ports such as uplinks and port channels are not trusted.
C.    All vEthernet ports are trusted and all Ethernet ports such as uplinks and port channels are not trusted.
D.    All vEthernet ports are not trusted and all Ethernet ports such as uplinks and port channels are trusted.

Answer: D


Braindump2go is famous for our Interactive Testing Engine that simulates a real exam environment as experienced on the actual test. We will help you become familiar with the testing environment in advance.Real 350-080 Exam Questions Plus Real 350-080 Exam Testing Environment! Braindump2go 100% Guarantees your pass of 350-080 Exam! 350-080 Dumps,394q 350-080 Exam Questions, 350-080 PDF and 350-080 VCE are also available for instant download in our website at any time! 24 hours professional assistance from IT Group! Braindump2go aims to help you pass 350-080 Exam easily!

FREE DOWNLOAD: NEW UPDATED 350-080 PDF Dumps & 350-080 VCE Dumps from Braindump2go: http://www.braindump2go.com/350-080.html (394 Q&A)