This page was exported from Free Braindump2go Latest Microsoft Exam Dumps [ http://www.cwnpdumps.com ]
Export date: Mon Oct 21 2:41:02 2019 / +0000 GMT

[FREE UPDATED QUESTIONS] Microsoft 70-417 New Updated Exam Questions Download From Braindump2go Freely (91-100)



The 70-417 Exam Practice Questions and Answers are ideal for the aspring candiates to grab exceptional grades in Microsoft 70-417 Exam! The 70-417 Questions and Answers are developed using the latest updated course content and all the answers are verified to ensure phenoment preparation for the actual 70-417 Exam!
Vendor: Microsoft
Exam Code: 70-417
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012 R2 Exam

29222

QUESTION 91
You have a server named Server1 that runs Windows Server 2012 R2.
You create a custom Data Collector Set (DCS) named DCS1.
You need to configure Server1 to start DCS1 automatically when the network usage exceeds 70 percent.
Which type of data collector should you create?

A.    A configuration data collector
B.    A performance counter data collector
C.    An event trace data collector
D.    A performance counter alert

Answer: D

QUESTION 92
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You plan to install the Active Directory Federation Services server role on Server1 to allow for Workplace Join.
You run nslookupenterpriseregistration and you receive the following results:

wps9509.tmp_thumb

You need to create a certificate request for Server1 to support the Active Directory Federation Services (AD FS) installation.
How should you configure the certificate request? To answer, drag the appropriate names to the correct locations. Each name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

wpsAD4B.tmp_thumb

Answer:

wpsBF17.tmp_thumb


QUESTION 93
You have a server named Server1 that runs Windows Server 2012 R2.
You discover that the performance of Server1 is poor.
The results of a performance report generated on Server1 are shown in the following table.

wpsD96B.tmp_thumb

You need to identify the cause of the performance issue.
What should you identify?

A.    Insufficient RAM
B.    Driver malfunction
C.    Excessive paging
D.    Non-uniform memory access (NUMA)

Answer: B
Explanation:
http://greatit.wordpress.com/2009/08/17/high-interrupt-cpu-time-troubleshooting-with-xperf/
http://blogs.technet.com/b/askperf/archive/2008/01/25/an-overview-of-troubleshooting-memory-issues.aspx

QUESTION 94
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and 10 web servers. All of the web servers are in an organizational unit (OU) named WebServers_OU. All of the servers run Windows Server 2012 R2. On Server1, you need to collect the error events from all of the web servers. The solution must ensure that when new web servers are added to WebServers_OU, their error events are collected automatically on Server1.
What should you do?

A.    On Server1, create a collector initiated subscription.
From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
B.    On Server1, create a collector initiated subscription.
From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.
C.    On Server1, create a source computer initiated subscription.
From a Group Policy object (GPO), configure the Configure forwarder resource usage setting.
D.    On Server1, create a source computer initiated subscription.
From a Group Policy object (GPO), configure the Configure target Subscription Manager setting.

Answer: D

QUESTION 95
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2. The domain contains an organizational unit (OU) named OU1. OU1 contains an OU named OU2. OU2 contains a user named User1.
User1 is the member of a group named Group1. Group1 is in the Users container.
You create five Group Policy objects (GPO).
The GPOs are configured as shown in the following table.

wps50E.tmp_thumb

The Authenticated Users group is assigned the default permissions to all of the GPOs.
There are no site-level GPOs.
You need to identify which three GPOs will be Applied to User1 and in which order the GPOs will be Applied to User1.
Which three GPOs should you identify in sequence? To answer, move the appropriate three GPOs from the list of GPOs to the answer area and arrange them in the correct order.

wps21B3.tmp_thumb[2]

Answer:

wps4CC9.tmp_thumb[2]

QUESTION 96
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2. DirectAccess is deployed to the network. Remote users connect to the DirectAccess server by using a variety of network speeds.
The remote users report that sometimes their connection is very slow.
You need to minimize Group Policy processing across all wireless wide area network (WWAN) connections.
Which Group Policy setting should you configure?

A.    Configure Group Policy slow link detection.
B.    Configure wireless policy processing.
C.    Change Group Policy processing to run asynchronously when a slow network connection is detected.
D.    Configure Direct Access connections as a fast network connection.

Answer: A

QUESTION 97
Your network contains a single Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains 400 desktop computers that run Windows 8 and 10 desktop computers that run Windows XP Service Pack 3 (SP3). All new desktop computers that are added to the domain run Windows 8. All of the desktop computers are located in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1. GPO1 contains startup script settings. You link GPO1 to OU1.
You need to ensure that GPO1 is Applied only to computers that run Windows XP SP3.
What should you do?

A.    Modify the Security settings of OU1.
B.    Run the Set-GPInheritancecmdlet and specify the -target parameter.
C.    Create and link a WMI filter to GPO1.
D.    Run the Set-GPLinkcmdlet and specify the -target parameter.

Answer: C
Explanation:
WMI Filtering is used to get information of the system and apply the GPO on it with the condition is met.Security filtering: apply a GPO to a specific group (members of the group)

QUESTION 98
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
All client computers run Windows 7. Group Policy objects (GPOs) are linked to the domain as shown in the exhibit. (Click the Exhibit button.)

wps8383.tmp_thumb

GPO2 contains user configurations only and GPO3 contains computer configurations only.
You need to configure the GPOs to meet the following requirements:
- Ensure that GPO2 only Applies to the user accounts in OU2 that are members of a global group named Group2.
- Ensure that GPO3 only Applies to the computer accounts in OU3 that have more than 100 GB of free disk space.
What should you do? To answer, drag the appropriate setting to the correct GPO. Each setting may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

wpsA3A1.tmp_thumb

Answer:

wpsBD3A.tmp_thumb


QUESTION 99
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains two organizational units (OUs) named OU1 and OU2 in the root of the domain. Two Group Policy objects (GPOs) named GPO1 and GP02 are created. GPO1 is linked to OU1. GPO2 is linked to OU2. OU1 contains a client computer named Computer1. OU2 contains a user named User1.
You need to ensure that the GPOs Applied to Computer1 are Applied to User1 when User1 logs on.
What should you configure?

A.    The GPO Status
B.    WMI Filtering
C.    GPO links
D.    Item-level targeting

Answer: D

QUESTION 100
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the HyperV server role installed. On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.

wpsDC4F.tmp_thumb[2]

You plan to create a snapshot of VM1.
You need to recommend a solution to minimize the amount of disk space used for the snapshot of VM1.
What should you do before you create the snapshot?

A.    Run the Stop-VM cmdlet.
B.    Convert diskl.vhd to a dynamically expanding disk.
C.    Configure VM1 to have a smaller virtual disk.
D.    Decrease the Minimum RAM.

Answer: A
Explanation:
For checkpoints created when the virtual machine is stopped The checkpoint contains the state of the hard disks only. For checkpoints created when the virtual machine is running The checkpoint contains the state of the hard disks and the data in memory.
Note: A checkpoint saves the state of each virtual hard disk that is attached to a virtual machine and all of the hard disk's contents, including application data files. For virtual machines on Hyper-V and VMware ESX Server hosts, a checkpoint also saves the hardware configuration information. By creating checkpoints for a virtual machine, you can restore the virtual machine to a previous state.


Braindump2go Regular Updates of Microsoft 70-417 Preparation Materials Exam Dumps, with Accurate Answers, Keeps the Members One Step Ahead in the Real 70-417 Exam. Field Experts with more than 10 Years Experience in Certification Field work with us.

25222

http://www.braindump2go.com/70-417.html

 

 


Post date: 2015-01-29 06:15:53
Post date GMT: 2015-01-29 06:15:53
Post modified date: 2015-01-29 06:19:34
Post modified date GMT: 2015-01-29 06:19:34

Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com