[FREE UPDATED QUESTIONS] Microsoft Exam Center Release New Exam 70-412 Braindump2go Provide Latest 70-412 Dumps for Free Download (286-295)

Instant Download 70-412 PDF Files! New Updated 346 Exam Questions and Answers help 100% Exam Pass! 70-412 Certification Get Quickly!

Vendor: Microsoft
Exam Code: 70-412
Exam Name: Configuring Advanced Windows Server 2012 R2 Services

1[10]

QUESTION 286
Drag and Drop Question
You have a server that runs Windows Server 2012 R2.
You create a new work folder named Share1.
You need to configure Share1 to meet the following requirements:
– Ensure that all synchronized copies of Share1 are encrypted.
– Ensure that clients synchronize to Share1 every 30 minutes.
– Ensure that Share1 inherits the NTFS permissions of the parent folder.
Which cmdlet should you use to achieve each requirement? To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

wps7A9F.tmp_thumb

Answer:

wps8E6E.tmp_thumb

QUESTION 287
You create a new virtual disk in a storage pool by using the New Virtual Disk Wizard.
You discover that the new virtual disk has a write-back cache of 1 GB.
You need to ensure that the virtual disk has a write-back cache of 5 GB.
What should you do?

A.    Detach the virtual disk, and then run the Resize-VirtualDisk cmdlet.
B.    Detach the virtual disk, and then run the Set-VirtualDisk cmdlet.
C.    Delete the virtual disk, and then run the New-StorageSubSystemVirtualDisk cmdlet.
D.    Delete the virtual disk, and then run the New-VirtualDisk cmdlet.

Answer: D
Explanation:
You must set the write-back cache during the initial new disk creation.
This setting is not configurable once the VHD has been created.

QUESTION 288
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You plan to install the Active Directory Federation Services server role on Server1 to allow for Workplace Join.
You run nslookup enterprise registration and you receive the following results:

wpsAEEA.tmp_thumb

You need to create a certificate request for Server1 to support the Active Directory Federation Services (AD FS) installation.
How should you configure the certificate request?
To answer, drag the appropriate names to the correct locations. Each name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

wpsC844.tmp_thumb

Answer:

wpsDE45.tmp_thumb

QUESTION 289
Your network contains an Active Directory domain named contoso.com.
The domain contains servers named Server1 and Server2 that run Windows Server 2012 R2.
Server1 has the Active Directory Federation Services server role installed.
Server2 is a file server.
Your company introduces a Bring Your Own Device (BYOD) policy.
You need to ensure that users can use a personal device to access domain resources by using Single Sign-On (SSO) while they are connected to the internal network.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    Enable the Device Registration Service in Active Directory.
B.    Publish the Device Registration Service by using a Web Application Proxy.
C.    Configure Active Directory Federation Services (AD FS) for the Device Registration Service.
D.    Create and configure a sync share on Server2.
E.    Install the Work Folders role service on Server2.

Answer: AC

QUESTION 290
Drag and Drop Question
You have two failover clusters named Cluster1 and Cluster2.
All of the nodes in both of the clusters run Windows Server 2012 R2.
Cluster1 hosts two virtual machines named VM1 and VM2.
You plan to configure VM1 and VM2 as nodes in a new failover cluster named Cluster3.
You need to configure the witness disk for Cluster3 to be hosted on Cluster2.
Which three actions should you perform in sequence? To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.

wps8.tmp_thumb

Answer:

wps12ED.tmp_thumb

QUESTION 291
Hotspot Question
Your network contains two Web servers named Server1 and Server2.
Both servers run Windows Server 2012 R2.
Server1 and 5erver2 are nodes in a Network Load Balancing (NLB) cluster.
The NLB cluster contains an application named App1 that is accessed by using the URL
http://app1.contoso.com.
You deploy a new server named Server3 that runs Windows Server 2012 R2.
The contoso.com DNS zone contains the records shown in the following table.

wps3646.tmp_thumb

You need to add Server3 to the NLB cluster.
What command should you run? To answer, select the appropriate options in the answer area.

wps4EA7.tmp_thumb

Answer:

wps60D1.tmp_thumb

QUESTION 292
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
The domain contains four member servers named Server1, Server2, Server3, and Server4.
All servers run Windows Server 2012 R2.
Server1 and Server3 are located in a site named Site1.
Server2 and Server4 are located in a site named Site2.
The servers are configured as nodes in a failover cluster named Cluster1.
Dynamic quorum management is disabled.
Cluster1 is configured to use the Node Majority quorum configuration.
You need to ensure that users in Site2 can access Cluster1 if the network connection between the two sites becomes unavailable.
What should you run from Windows PowerShell? To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

wps7C6D.tmp_thumb

Answer:

wps8EF5.tmp_thumb

QUESTION 293
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2.
The network has the physical sites and TCP/IP subnets configured as shown in the following table.

wpsA7C3.tmp_thumb[2]

You have a web application named App1 that is hosted on six separate Web servers.
DNS has the host names and IP addresses registered as shown in the following table.

wpsCF8F.tmp_thumb[2]

You discover that when users connect to app1.contoso.com, they are connected frequently to a server that is not on their local subnet.
You need to ensure that when the users connect to app1.contoso.com, they connect to a server on their local subnet.
The connections must be distributed across the servers that host app1.contoso.com on their subnet.
Which two settings should you configure? To answer, select the appropriate two settings in the answer area.

wpsFC5A.tmp_thumb

Answer:

wps142E.tmp_thumb

QUESTION 294
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 and a member server named Server1.
All servers run Windows Server 2012 R2.
You install the IP Address Management (IPAM) Server feature on Server1.
From the Provision IPAM wizard, you select the Group Policy Based provisioning method and enter a GPO name prefix of IPAM1.
You need to provision IPAM by using Group Policy.
What command should you run on Server1 to complete the process? To answer, select the appropriate options in the answer area.

wps3BCB.tmp_thumb

Answer:

wps4FBA.tmp_thumb

QUESTION 295
Your network contains an Active Directory domain named contoso.com.
The domain contains two member servers named Server1 and Server2.
You install the DHCP Server server role on Server1 and Server2.
You install the IP Address Management (IPAM) Server feature on Server1.
You notice that you cannot discover Server1 or Server2 in IPAM.
You need to ensure that you can use IPAM to discover the DHCP infrastructure.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    On Server2, create an IPv4 scope.
B.    On Server1, run the Add-IpamServerInventory cmdlet.
C.    On Server2, run the Add-DhcpServerInDc cmdlet
D.    On both Server1 and Server2, run the Add-DhcpServerv4Policy cmdlet.
E.    On Server1, uninstall the DHCP Server server role.

Answer: AE
Explanation:
Verify that the DHCP server role is not installed on the IPAM server. Verify that at least one IPv4 scope is configured on a DHCP server, and that the IPAM server has a TCP/IP connection to the DHCP server.
Also verify that DHCP INFORM request messages sent by IPAM server are not filtered on the network.
http://technet.microsoft.com/en-us/library/jj878309.aspx


Braindump2go Regular Updates of Microsoft 70-412 Preparation Materials Exam Dumps, with Accurate Answers, Keeps the Members One Step Ahead in the Real 70-412 Exam. Field Experts with more than 10 Years Experience in Certification Field work with us.

1[10]

http://www.braindump2go.com/70-412.html