[TOTALLY FREE] Microsoft 70-412 Latest Important Questions with Answers and Explanation Shared By Braindump2go (306-315)

70-412 Exam Dumps Free Shared By Braindump2go For Instant Download Now! Download Latest 70-412 Exam Questions and pass 70-412 one time easily! Do you want to be a winner?

Vendor: Microsoft
Exam Code: 70-412
Exam Name: Configuring Advanced Windows Server 2012 R2 Services

1[10]

QUESTION 306
Your network contains an Active Directory domain named contoso.com.
The domain contains two member servers named Server1 and Server2.
All servers run Windows Server 2012 R2.
Server1 and Server2 have the Failover Clustering feature installed.
The servers are configured as nodes in a failover cluster named Cluster1.
Cluster1 contains a cluster disk resource.
A developer creates an application named App1.
App1 is NOT a cluster-aware application.
App1 runs as a service. App1 stores date on the cluster disk resource.
You need to ensure that App1 runs in Cluster1.
The solution must minimize development effort.
Which cmdlet should you run?

A.    Add-ClusterGenericServiceRole
B.    Add-ClusterGenericApplicationRole
C.    Add-ClusterScaleOutFileServerRole
D.    Add-ClusterServerRole

Answer: A
Explanation:
I think it’s A.
The questions says “…App1 runs as a service”
http://technet.microsoft.com/en-us/library/ee460966.aspx
“Configure high availability for a service that was not originally designed to run in a failover cluster.”
If you run an application as a Generic Application, the cluster software will start the application, then periodically query the operating system to see whether the application appears to be running. If so, it is presumed to be online, and will not be restarted or failed over

QUESTION 307
Your network contains an Active Directory domain named contoso.com.
A previous administrator implemented a Proof of Concept installation of Active Directory Rights Management Services (AD RMS).
After the proof of concept was complete, the Active Directory Rights Management Services server role was removed.
You attempt to deploy AD RMS.
During the configuration of AD RMS, you receive an error message indicating that an existing AD RMS Service Connection Point (SCP) was found.
You need to remove the existing AD RMS SCP.
Which tool should you use?

A.    Active Directory Users and Computers
B.    Authorization Manager
C.    Active Directory Domains and Trusts
D.    Active Directory Sites and Services

Answer: D
Explanation:
Another possible Answer is “ADSIEdit” if you have this choice.

QUESTION 308
You have a server named SCI that runs a Server Core Installation of Windows Server 2012 R2. Shadow copies are enabled on all volumes.
You need to delete a specific shadow copy.
The solution must minimize server downtime.
Which tool should you use?

A.    Shadow
B.    Diskshadow
C.    Wbadmin
D.    Diskpart

Answer: B
Explanation:
DiskShadow.exe is a tool that exposes the functionality offered by the Volume Shadow Copy Service (VSS).
The diskshadow command delete shadows deletes shadow copies.

wpsFB6E.tmp_thumb

QUESTION 309
Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2012 R2.
All servers have the Hyper-V server role and the Failover Clustering feature installed.

wps114F.tmp_thumb

You need to replicate virtual machines from Cluster1 to Cluster2.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)

A.    From Hyper-V Manager on a node in Cluster2, create three virtual machines.
B.    From Cluster2, add and configure the Hyper-V Replica Broker role.
C.    From Failover Cluster Manager on Cluster1, configure each virtual machine for replication.
D.    From Cluster1, add and configure the Hyper-V Replica Broker role.
E.    From Hyper-V Manager on a node in Cluster2/ modify the Hyper-V settings.

Answer: BCD
Explanation:
These are two clusters, to replicate any VM to a cluster you need to configure the Replica Broker role on each cluster the last step should be enabling replication on the VMs.

QUESTION 310
You have a server named Server1 that runs Windows Server 2012 R2.
Each day, Server1 is backed up fully to an external disk.
On Server1, the disk that contains the operating system fails.
You replace the failed disk.
You need to perform a bare-metal recovery of Server1 by using the Windows Recovery
Environment (Windows RE).
What should you do?

A.    Run the Start-WBVolumeRecovery cmdlet and specify the -backupset parameter.
B.    Run the Get-WBBareMetalRecovery cmdlet and specify the -policy parameter.
C.    Run the wbadmin.exe start recovery command and specify the –recoverytarget parameter.
D.    Run the wbadmin.exe start sysrecovery command and specify the -backuptarget parameter.

Answer: D
Explanation:
wbadmin start sysrecovery
Performs a system recovery (bare metal recovery) using the parameters that you specify.
This subcommand can be run only from the Windows Recovery Environment, and it is not listed by default in the usage text of Wbadmin.

wps30B2.tmp_thumb

QUESTION 311
You have a server named LON-DC1 that runs Windows Server 2012 R2. An iSCSI virtual disk named VirtualiSCSI1.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)

wps4AF7.tmp[4]_thumb

You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.
VirtualiSCSIl.vhd is removed from LON-DC1.
You need to assign VirtualiSCSI2.vhd a logical unit value of 0.
What should you do?

A.    Modify the properties of the itgt ISCSI target.
B.    Modify the properties of the VirtualiSCSI2.vhd iSCSI virtual disk.
C.    Run the Set-VirtualDisk cmdlet and specify the -Uniqueld parameter.
D.    Run the iscsicli command and specify the reportluns parameter.

Answer: B
Explanation:
The virtual disk has the option to change the lun ID, no other option available in the answers appear to allow this change.
Note: Logical unit numbers (LUNs) created on an iSCSI disk storage subsystem are not directly assigned to a server. For iSCSI, LUNs are assigned to logical entities called targets.

QUESTION 312
Your network contains an Active Directory domain named contoso.com.
All servers run Windows Server 2012 R2.
The domain contains a domain controller named DC1 that is configured as an enterprise root certification authority (CA).
All users in the domain are issued a smart card and are required to log on to their domain- joined client computer by using their smart card.
A user named User1 resigned and started to work for a competing company.
You need to prevent User1 immediately from logging on to any computer in the domain.
The solution must not prevent other users from logging on to the domain.
Which tool should you use?

A.    Active Directory Users and Computers
B.    Certificate Templates
C.    The Security Configuration Wizard
D.    The Certificates snap-in

Answer: A

QUESTION 313
Your network contains an Active Directory domain named contoso.com.
The domain contains a domain controller named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed.
The network contains client computers that run either Linux, Windows 7, or Windows 8.
You have a zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)

wps9502.tmp_thumb

You plan to configure Name Protection on all of the DHCP servers.
You need to configure the adatum.com zone to support Name Protection.
Which two configurations should you perform from DNS Manager? (Each correct answer presents part of the solution. Choose two.)

A.    Sign the zone.
B.    Store the zone in Active Directory.
C.    Modify the Security settings of the zone.
D.    Configure Dynamic updates.
E.     Add a DNS key record

Answer: BD
Explanation:
http://technet.microsoft.com/en-us/library/ee941152(v=ws.10).aspx

wpsC18F.tmp_thumb

wpsD84B.tmp_thumb

QUESTION 314
Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 and Server2 are nodes in a failover cluster named Cluster1.
The network contains two servers named Server3 and Server4 that run Windows Server 2012 R2.
Server3 and Server4 are nodes in a failover cluster named Cluster2.
You need to move all of the applications and the services from Cluster1 to Cluster2.
What should you do first from Failover Cluster Manager?

A.    On a server in Cluster2, configure Cluster-Aware Updating.
B.    On a server in Cluster2, click Move Core Cluster Resources, and then click Best Possible Node.
C.    On a server in Cluster1, click Move Core Cluster Resources, and then click Best Possible Node.
D.    On a server in Cluster1, click Migrate Roles.

Answer: D
Explanation:
http://blogs.msdn.com/b/clustering/archive/2012/06/25/10323434.aspx

wps5B2.tmp_thumb

QUESTION 315
Your network contains an Active Directory domain named adatum.com.
The domain contains a file server named FS1 that runs Windows Server 2012 R2 and has the File Server Resource Manager role service installed.
All client computers run Windows 8.
File classification and Access-Denied Assistance are enabled on FS1.
You need to ensure that if users receive an Access Denied message, they can request assistance by email from the Access Denied dialog box.
What should you configure?

A.    A file management task
B.    A classification property
C.    The File Server Resource Manager Options
D.    A report task

Answer: C
Explanation:

wps21DA.tmp_thumb


Braindump2go Promise All 70-412 Questions and Answers are the Latest Updated,we aim to provide latest and guaranteed questions for all certifications.You just need to be braved in trying then we will help you arrange all left things! 100% Pass All Exams you want Or Full Money Back! Do yo want to have a try on passing 70-412?

1[10]

http://www.braindump2go.com/70-412.html